– Router and Modem Default IP Address

For using the internet provided by an internet service provider, we need to use a router. There are numerous routers manufactured by various companies such as D-Link, TP-Link, Netgear, etc. Each router is associated with an IP address which is used to access the administrator dashboard of that router. From here, one can configure or manage that router. is one such private IPv4 network address which is associated with some home-use broadband router. To solve any error or to manage the router, one can go to ‘’ this IP address using any web browser and make the necessary changes.

Some of the brands that use ‘’ this IP address are:
1. Westell DSL Modems (US ONLY)
2. Some Linksys Routers
3. 3Com Routers
4. Billion Routers
5. Netopia / Cayman Gateways

How to Setup your router using

Here, we are going to discuss how to set up a router which is associated to ‘’ this IP address. So let’s get started.

Step 1- Turn on your router and connect it to a device by using a wireless connection. You can also use a network cable to connect your PC/laptop to your router.

Step 2- Once connected, open a web browser on the device which you have connected to your router. Here, type ‘’ in the search bar and hit ‘Enter.’

Step 3- You will be directed to the setup page of your router. You will have to log in using the default username and password which is ‘admin.’ Once you log in successfully, a setup wizard will be displayed on your screen using which you set your router step by step.

Step 4- You have to set all the preferences according to your usage. Also, you can modify the password and the SSID of your router from here. You must keep saving the changes made in each category otherwise the changes which you have made will be undone.

Step 5- Once you are done with all the changes which you had to make, and when your router is all set, you must restart your router to apply all the changes which you have made.

Once you change the password of your router, you will have to reconnect your device to your router using the new password which you have set.

Reasons Why You Might Not be Able to Access

If you are not able to access ‘’ this IP address, there might be a few reasons which are listed below:

1. Your router is not turned on or is not ready to use. Be patient till the router is completely turned on and is ready to use.

2. Your router is not associated to ‘’, and you have mistaken it with some other IP address. You can try using 192.168.l.l or instead of in the address bar. Otherwise, To know the IP address associated with your router, open CMD and type ‘ipconfig/all‘ and know the correct IP address. Or you can use the command ‘ping’ and if it displays the message ‘Timeout’ then it means that you cannot connect to that IP address through your router.

3. If you are still unable to access ‘’ then, the network port is not specified, or there must be a firewall.

4. Ensure that all the required connections are made properly. Especially the power and the ethernet cable. If they are not connected properly, try putting them back in place.

5. If the problem is still not solved, disconnect all the connections of your router and turn it off. Then, reconnect the connections and restart your router. This should solve the problem.

6. If you are still facing difficulty in accessing the configuration page then, disconnect the device you are using from the router. Then, reconnect your device to the router and try accessing the configuration page again.

Can you assign ‘’ this IP address to a router?

Most of the routers are assigned their IP addresses by using Dynamic Host Configuration Protocol (DHCP). This means that you can reassign a different IP address to your router. But, you may face connection issues if the network’s router is not configured correspondingly.

Each router is configured with a range of private addresses. Hence, you can find out the range of your router’s IP addresses and check whether ‘’ is present in the list or not. If it is, you can assign ‘’ this IP address to your router.


This is all you need to know about ‘’ this IP address. If you still have queries regarding this IP address, then please let us know in the comments section below.